1. The name of the model (P / N): electromagnetic absorption of iron BS-1038V-01 automatic microplate reader solenoid valve solenoid valve factory in Dongguan 2. Standard Test Conditions (TEST): 2.1 Environment: ambient temperature 20 ℃, relative humidity 65%, but the test results to determine without any doubt the occasion occurs in ambient temperature 5-30 ℃, relative humidity in the 40-85% range test 2.2 posture: horizontal 2.3 Load: air pressure 30Kpa 3. Type: Normal closed (when the exhaust emission to the atmosphere) 4. nominal conditions: 4.1 Rated voltage: DC24V 4.2 Operating voltage range: DC24V ± 10% 4.3 Rated current: 0.25A REF 4.4 DC Resistance: 96.0Ω ± 10% at20 ℃ 4.5 rated Power consumption: 6.0W 4.6 rated conditions of use: Intermittent ambient temperature 27 ℃ pass two seconds, three seconds off the test 72 hours the product surface temperature below 60 ℃ 4.7 Insulation class:. B pole 4.8 Fluid: Water 5. Features: 5.1 Gas Tightness: the working and non-working condition solenoid valve does not leak. 5.2 Withstanding Voltage: AC700V (50 / 60HZ) /0.5mA,10 maximum temperature rise 5.3 seconds without exception: Can long power. Rise in temperature below 100 ℃ 5.4 wire strength: the wire leads from the direction of the static load 0.5Kgf no abnormal increase of 5.5 life situation: under normal operating conditions for more than 50 million times 6. Structure: 6.1 Appearance: No damage, cracks, rust, Surface blemishes 6.2 valve placement position: horizontal solenoid valve installation Caution: 1. Installation of impurities within the first pipeline must be clean 2. In order to extend the life of the Yuan should be careful to check the electromagnetic valve 3. Use a filter attached to the tip the device is damaged during transit, and comply with the technical requirements of 4. installation, you must confirm the use of fluids, voltage, power and temperature 5. Avoid using in vibration environments, and note that at low temperatures freezing measures Dongguan Bo Shun Industrial Co., solenoid valve products with advanced structure, reliable performance, attractive appearance, and quality of service, trusted by the majority of domestic and foreign customers. Bo-company specialized in providing fluid automation and control for your remote execution solutions.